q_gpd function

GPD quantile of sample

GPD quantile of sample

Compute quantile of General Pareto Distribution fitted to sample by peak over threshold (POT) method using threshold from truncation proportion, comparing several R packages doing this

q_gpd(
  x,
  probs = c(0.8, 0.9, 0.99),
  truncate = 0,
  threshold = berryFunctions::quantileMean(x, truncate),
  package = "extRemes",
  method = NULL,
  list = FALSE,
  undertruncNA = TRUE,
  quiet = FALSE,
  ttquiet = quiet,
  efquiet = quiet,
  ...
)

Arguments

  • x: Vector with numeric values. NAs are silently ignored.
  • probs: Probabilities of truncated (Peak over threshold) quantile. DEFAULT: c(0.8,0.9,0.99)
  • truncate: Truncation percentage (proportion of sample discarded). DEFAULT: 0
  • threshold: POT cutoff value. If you want correct percentiles, set this only via truncate, see Details. DEFAULT: quantileMean(x, truncate)
  • package: Character string naming package to be used. One of c("lmomco","evir","evd","extRemes","fExtremes","ismev"). DEFAULT: "extRemes"
  • method: method passed to the fitting function, if applicable. Defaults are internally specified (See Details), depending on package, if left to the DEFAULT: NULL.
  • list: Return result from the fitting function with the quantiles added to the list as element quant and some information in elements starting with q_gpd_. DEFAULT: FALSE
  • undertruncNA: Return NAs for probs below truncate? Highly recommended to leave this at the DEFAULT: TRUE
  • quiet: Should messages from this function be suppressed? DEFAULT: FALSE
  • ttquiet: Should truncation!=threshold messages from this function be suppressed? DEFAULT: quiet
  • efquiet: Should warnings in function calls to the external packages be suppressed via options(warn=-1)? The usual type of warning is: NAs produced in log(...). DEFAULT: quiet
  • ...: Further arguments passed to the fitting function listed in section Details.

Returns

Named vector of quantile estimates for each value of probs,

or if(list): list with element q_gpd_quant and info-elements added. q_gpd_n_geq is number of values greater than or equal to q_gpd_threshold. gt is only greater than.

Details

Depending on the value of "package", this fits the GPD using

lmomco::pargpa

evir::gpd

evd::fpot

extRemes::fevd

fExtremes::gpdFit

ismev::gpd.fit

Renext::Renouv or Renext::fGPD

The ‘method’ defaults (and other possibilities) are

lmomco: none, only L-moments

evir: "pwm" (probability-weighted moments), or "ml" (maximum likelihood)

evd: none, only Maximum-likelihood fitting implemented

extRemes: "MLE", or "GMLE", "Bayesian", "Lmoments"

fExtremes: "pwm", or "mle"

ismev: none, only Maximum-likelihood fitting implemented

Renext: "r" for Renouv (since distname.y = "gpd", evd::fpot is used), or 'f' for fGPD (with minimum POTs added)

The Quantiles are always given with probs in regard to the full (uncensored) sample. If e.g. truncate is 0.90, the distribution function is fitted to the top 10% of the sample. The 95th percentile of the full sample is equivalent to the 50% quantile of the subsample actually used for fitting. For computation, the probabilities are internally updated with p2=(p-t)/(1-t)

but labeled with the original p. If you truncate 90% of the sample, you cannot compute the 70th percentile anymore, thus undertruncNA should be left to TRUE.

If not exported by the packages, the quantile functions are extracted from their source code (Nov 2016).

Examples

data(annMax)
q_gpd(annMax)
q_gpd(annMax, truncate=0.6)
q_gpd(annMax, truncate=0.85)
q_gpd(annMax, truncate=0.91)

q_gpd(annMax, package="evir")
q_gpd(annMax, package="evir", method="ml")
q_gpd(annMax, package="evd")
q_gpd(annMax, package="extRemes")
q_gpd(annMax, package="extRemes", method="GMLE")
#q_gpd(annMax, package="extRemes", method="Bayesian") # computes a while
q_gpd(annMax, package="extRemes", method="Lmoments")
q_gpd(annMax, package="extRemes", method="nonsense") # NAs
q_gpd(annMax, package="fExtremes")                   # log warnings
q_gpd(annMax, package="fExtremes", efquiet=TRUE)    # silenced warnings
q_gpd(annMax, package="fExtremes", method= "mle")
q_gpd(annMax, package="ismev")
q_gpd(annMax, package="Renext")
q_gpd(annMax, package="Renext", method="f")
berryFunctions::is.error(q_gpd(annMax, package="nonsense"), force=TRUE)

# compare all at once with
d <- distLquantile(annMax); d
# d <- distLquantile(annMax, speed=FALSE); d # for Bayesian also

q_gpd(annMax, truncate=0.85, package="evd")          # Note about quantiles
q_gpd(annMax, truncate=0.85, package="evir")
q_gpd(annMax, truncate=0.85, package="evir", quiet=TRUE) # No note
q_gpd(annMax, truncate=0.85, package="evir", undertruncNA=FALSE)

q_gpd(annMax, truncate=0.85, package="evir", list=TRUE)
str(  q_gpd(annMax, truncate=0.85, probs=0.6, package="evir", list=TRUE) )# NAs
str(  q_gpd(annMax, package="evir",      list=TRUE)   )
str(  q_gpd(annMax, package="evd",       list=TRUE)   )
str(  q_gpd(annMax, package="extRemes",  list=TRUE)   )
str(  q_gpd(annMax, package="fExtremes", list=TRUE)   )
str(  q_gpd(annMax, package="ismev",     list=TRUE)   )
str(  q_gpd(annMax, package="Renext",    list=TRUE)   )

q_gpd(annMax, package="evir", truncate=0.9, method="ml") # NAs (MLE fails often)

trunc <- seq(0,0.9,len=500)
library("pbapply")
quant <- pbsapply(trunc, function(tr) q_gpd(annMax, pack="evir", method = "pwm",
                                            truncate=tr, quiet=TRUE))
quant <- pbsapply(trunc, function(tr) q_gpd(annMax, pack="lmomco", truncate=tr, quiet=TRUE))
plot(trunc, quant["99%",], type="l", ylim=c(80,130), las=1)
lines(trunc, quant["90%",])
lines(trunc, quant["80%",])
plot(trunc, quant["RMSE",], type="l", las=1)

## Not run:

## Not run in checks because simulation takes too long

trunc <- seq(0,0.9,len=200)
dlfs <- pblapply(trunc, function(tr) distLfit(annMax, truncate=tr, quiet=TRUE, order=FALSE))
rmses <- sapply(dlfs, function(x) x$gof$RMSE)
plot(trunc, trunc, type="n", ylim=range(rmses,na.rm=TRUE), las=1, ylab="rmse")
cols <- rainbow2(17)[rank(rmses[,1])]
for(i in 1:17) lines(trunc, rmses[i,], col=cols[i])

dlfs2 <- lapply(0:8/10, function(tr) distLfit(annMax, truncate=tr, quiet=TRUE))
pdf("dummy.pdf")
dummy <- sapply(dlfs2, function(x)
{plotLfit(x, cdf=TRUE, main=x$truncate, ylim=0:1, xlim=c(20,135), nbest=1)
title(sub=round(x$gof$RMSE[1],4))
})
dev.off()

# truncation effect
mytruncs <- seq(0, 0.9, len=150)
oo <- options(show.error.messages=FALSE, warn=-1)
myquants <- sapply(mytruncs, function(t) q_gpd(annMax, truncate=t, quiet=TRUE))
options(oo)
plot(1, type="n", ylim=range(myquants, na.rm=TRUE), xlim=c(0,0.9), las=1,
     xlab="truncated proportion", ylab="estimated quantiles")
abline(h=quantileMean(annMax, probs=c(0.8,0.9,0.99)))
for(i in 1:3) lines(mytruncs, myquants[i,], col=i)
text(0.3, c(87,97,116), rownames(myquants), col=1:3)

# Underestimation in small samples
# create known population:
dat <- extRemes::revd(1e5, scale=50, shape=-0.02, threshold=30, type="GP")
op <- par(mfrow=c(1,2), mar=c(2,2,1,1))
hist(dat, breaks=50, col="tan")
berryFunctions::logHist(dat, breaks=50, col="tan")
par(op)

# function to estimate empirical and GPD quantiles from subsamples
samsizeeffect <- function(n, nrep=30, probs=0.999, trunc=0.5, Q=c(0.4,0.5,0.6))
{
res <- replicate(nrep, {
subsample <- sample(dat, n)
qGPD <- q_gpd(subsample, probs=probs, truncate=trunc)
qEMP <- berryFunctions::quantileMean(subsample, probs=probs, truncate=trunc)
c(qGPD=qGPD, qEMP=qEMP)})
apply(res, MARGIN=1, berryFunctions::quantileMean, probs=Q)
}

# Run and plot simulations
samplesize <- c(seq(20, 150, 10), seq(200,800, 100))
results <- pbapply::pblapply(samplesize, samsizeeffect)
res <- function(row, col) sapply(results, function(x) x[row,col])
berryFunctions::ciBand(yu=res(3,1),yl=res(1,1),ym=res(2,1),x=samplesize,
  main="99.9% Quantile underestimation", xlab="subsample size", ylim=c(200,400), colm=4)
berryFunctions::ciBand(yu=res(3,2),yl=res(1,2),ym=res(2,2),x=samplesize, add=TRUE)
abline(h=berryFunctions::quantileMean(dat, probs=0.999))
text(300, 360, "empirical quantile of full sample")
text(300, 340, "GPD parametric estimate", col=4)
text(300, 300, "empirical quantile estimate", col="green3")
## End(Not run)
 # end of dontrun

References

https://stackoverflow.com/q/27524131, https://stats.stackexchange.com/q/129438

See Also

distLquantile which compares results for all packages

Other related packages (not implemented):

https://cran.r-project.org/package=gPdtest

https://cran.r-project.org/package=actuar

https://cran.r-project.org/package=fitdistrplus

https://cran.r-project.org/package=lmom

Author(s)

Berry Boessenkool, berry-b@gmx.de , Feb 2016

extremeStat packageRead PDF manual
  • Maintainer: Berry Boessenkool
  • License: GPL (>= 2)
  • Last published: 2024-01-13

Useful links